Original Wooden Engine Support - NCRS Discussion Boards

Original Wooden Engine Support

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joseph T.
    Expired
    • April 30, 1976
    • 2074

    Original Wooden Engine Support

    Fifty..years ago!!!

    This is one of the 1957 Sebring engines sitting in the hanger at Sebring, Florida International 12 hour Grand Prix... March 1957.

    There were 4 more just like it..in the hanger. Two of the other complete FI engines had painted valve covers???

    Joe Trybulec




    Attached Files
  • Michael H.
    Expired
    • January 29, 2008
    • 7477

    #2
    Re: Original Wooden Engine Support

    Joe,

    Hard to tell for sure but it looks like the balancer and pulley are retained by a center bolt and large washer?

    Excellent pic, thanks.

    Comment

    • Art A.
      Expired
      • June 30, 1984
      • 834

      #3
      Re: Original Wooden Engine Support

      And................I'll bet that they all were assembled in the Trans/Axle room at Chevrolet Engineering under a Work Order number. Tooooo bad we can't see the pads.

      Art

      Comment

      • Joseph T.
        Expired
        • April 30, 1976
        • 2074

        #4
        Re: Original Wooden Engine Support

        Art..those stamp pads would tell a tale..I'm sure!

        I have been told that blown engines were returned to Michigan..for analysis..and to keep the special Dupont lubricant formulas a secret.

        Do you think Engineering scrapped these race engines after they returned to Michigan... or what was the process?

        Joe

        Comment

        • John H.
          Beyond Control Poster
          • December 1, 1997
          • 16513

          #5
          Re: Original Wooden Engine Support

          Joe -

          Most likely full teardown, inspection/measurement of every part, full layout display for a week on a long table in the lab hallway with a copy of the inspection report, then el scrappo...that's how the 430 and 494 Can-Am engines and Hewland transaxles were handled in 1969.

          Comment

          • Joseph T.
            Expired
            • April 30, 1976
            • 2074

            #6
            Thanks John! *NM*

            Comment

            • Art A.
              Expired
              • June 30, 1984
              • 834

              #7
              Re: Thanks John!

              Yep, As usual John's spot on. I walked pasted those inspaection tables almost every day and even stoped a few time to examined some of the parts................if only knew then what I know today I would have looked alot closer. I'm sure the inspection reports John mentions were documented in what was called a TWO......Test Work Order.

              Art

              Comment

              • Mike M.
                NCRS Past President
                • May 31, 1974
                • 8365

                #8
                Re: Thanks John!

                joe, john, mike and art: 50 years from now, vette guys are gonna review your recent posts and thank god for your input and the existence of the NCRS TDB. thanks guys, mike

                Comment

                • Mark #28455

                  #9
                  Wanna bet?

                  We remember Corvettes fondly because they were the top performing cars during our youth. Many that drooled over them can now finally afford one! But who are the younger generation today? They are mostly interested in import cars with the "fart can" mufflers. As we die off over time, the "glory days" of the old Corvettes will be mostly forgotten.

                  Did you ever wonder ... when people become senile, they start to hoard the most unusual things - old newspapers, popsicle stick lamps, bobble head dolls, heck they even save old poop in jars (wasn't that Elvis' thing or was it Howard Hughes ). I wonder what the "average American" thinks about our obsession with tracking down the last known 50 year old NOS lug nut?

                  Our active membership has remained steady for a number of years (new members join, others quit or die). If we still want the NCRS to be around in 50 years, we need to actively seek out new members.

                  Mark

                  Comment

                  Working...

                  Debug Information

                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"