Follow up: 79-77 rear frame conversion - NCRS Discussion Boards

Follow up: 79-77 rear frame conversion

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael B.
    Expired
    • April 1, 1999
    • 178

    Follow up: 79-77 rear frame conversion

    Sharpened air chisel

    3" Cutting wheel on die grinder

    application of patient persuation:

    Successful removal of the 2 rear frame members (rear frame brace where the gas tank straps to) took about 2 hours. Gently cut into the weld beads to allow the air chisel to have some place to bite other than the frame steel.

    Anyone need a 79 rear frame member - fully restored, using John Deere inhibitor and black (man that stuff is tough to take off a sand blasted surface - note, edges are a bit frayed, and the part is located in Canada (Markham).

    Cheers,

    Michael B.
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"