If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You must be an NCRS member
before you can post: click the Join NCRS link above to join. To start viewing messages,
select the forum that you want to visit from the selection below.
Working on a 390hp with A/C, AIM shows speedo cable going thru the firewall above the clutch rod, where I usually see a plug. I thought the tach and speedo cables went thru together. AIM shows on page 230 for a '66. What is right? The AIM also shows the cable going into the trans on the drivers side, my tail shaft has speedo input on the pass. side. Does the cable go under or over the trans?
Jeremy, in the 67 AIM the same as you describe is shown for a 3 speed. If you look at the section for an M20,21 etc you'l notice that the routing is different, speedo and tach together and running down the passenger side of trans with a plug (item 2) in the hole provided for the 3 speed. I hope the 66 AIM is the same
We use cookies to deliver our services, and to analyze site activity. We do not share or sell any personal information about our users. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment