Brake Assist Instalation - NCRS Discussion Boards

Brake Assist Instalation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Don #44697

    Brake Assist Instalation

    I have a 68 Corvette with the Big Block 427. I am changing the brakes by adding a brake assist unit. I used the bottom two holes in the fire wall and had to drill two additional holes to make the bolts fit.

    The unit is to low and the Master cylinder is against the wheel well.

    How do I install the unit to move it toward the engine to make room for the cylinder ?

    Thanks
  • Stephen L.
    Extremely Frequent Poster
    • May 31, 1984
    • 3148

    #2
    Re: Brake Assist Instalation

    Sounds like you have the incorrect power brake booster assy.....
    Might want to double check with a '68 owner for photos or check your AIM for some help....

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"