66 Coupe Window Channel - NCRS Discussion Boards

66 Coupe Window Channel

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Clark D.
    Expired
    • August 31, 2004
    • 50

    66 Coupe Window Channel

    I am replacing the top and rear window channel on my 66 coupe. I purchased the prebent window channels from one of the major suppliers and attempted to install. It appears the clips do not line up with the slots (holes) in the door as several clips are way off. Does anyone have any experience with this replacement? Are some of the window channels better than others? I would appreciate any tips.
    Thanks
    Clark #42490
  • Stephen L.
    Extremely Frequent Poster
    • May 31, 1984
    • 3148

    #2
    Re: 66 Coupe Window Channel

    When I replaced my channels I found that the new clips were too thick to go into the holes. I ground them off to appear more like the originals. I don't recall having a hole alignement problem. They are left and right, as one side of the channel chrome is different than the other side. If you have an alignment problem I believe you can remove the clips and reinstall at the correct location.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"