C2 Fender and hood emblem attachment? - NCRS Discussion Boards

C2 Fender and hood emblem attachment?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dwight P.
    Very Frequent User
    • June 30, 1983
    • 176

    C2 Fender and hood emblem attachment?

    Are the speed nuts that attach the fender and hood emblems cad/zinc/black phosphate or just black from the undercoat/paint? Judging manual does not address this question.

    DP
  • Kent K.
    Extremely Frequent Poster
    • December 1, 1982
    • 1139

    #2
    Re: C2 Fender and hood emblem attachment?

    Dwight - I believe emblems were attached after the black-out process. As to speed nut finish, I don't know if they are black phosphate or zinc plated. Others will jump in and answer this part.

    Regards, Kent #6201
    Kent
    1967 327/300 Convert. w/ Air - Duntoved in 1994
    1969 427/435 Coupe - 1 previous owner
    2006 Coupe - Driver & Fun Car !!!
    NCM Founder - Member #718

    Comment

    • Michael H.
      Expired
      • January 29, 2008
      • 7477

      #3
      Re: C2 Fender and hood emblem attachment?

      Dwight,

      Kent is correct. All emblems were installed after the blackout process so no paint should appear on any of the emblem studs or nuts.

      Most of the emblem attaching nuts were a gold colored plating, although many in 64 and 65 were black. Either color should be acceptable.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"