3x2 center carb vent control arm and valve missing - NCRS Discussion Boards

3x2 center carb vent control arm and valve missing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Wayne M.
    Expired
    • March 1, 1980
    • 6414

    #16
    Re: 3x2 center carb vent control arm and valve mis

    MM --- After the introduction of the bowl idle vent, in 1966, it appears that ALL Holley trottle shafts had the extra lever, whether the carb had the vent or not. GM Engineering drawings in A.Colvin's book bear this out. Don't know if this continued after 1970, when bowl idle vents were history.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"