Wing nut nickel and dime theory - NCRS Discussion Boards

Wing nut nickel and dime theory

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Harmon C.
    Extremely Frequent Poster
    • August 31, 1994
    • 3228

    #16
    Re: Addendum

    Joe
    I judge in 73-77 area and the nut I feel is original is like the one in your picture. I look for the wings looking from the top to be slightly open not parallel and the thickness of your 69. Your wing nut looks this way in both areas. The wing nut did change to cad in 73 but the size is like your example.
    Thank for posting the pictures again and I had to change some settings to find the Jan. 10th post as I had not followed it closely. I see the material thickness even got a .001-.002 thicker on the second measuring so it is even closer to a nickel.

    Lyle
    Lyle

    Comment

    • Harry Sadlock

      #17
      Re: Are you referring to thread of Jan 10-11 ?

      No part number Joe, was an old cardboard box full of nuts, bolts, etc.

      Harry

      Comment

      • Joe L.
        Beyond Control Poster
        • February 1, 1988
        • 43193

        #18
        Re: Addendum

        Lyle-----

        Yes, however, it's very hard to precisely measure material thickness on a die stamped part like this. At the "thousandths" level, it depends where the measurement is taken.
        In Appreciation of John Hinckley

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"