C2 Side window and vent window butyl

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Louis C.
    Expired
    • October 1, 1988
    • 60

    #1

    C2 Side window and vent window butyl

    Anyone know a source to buy the rubber window butyl to set side window and vent window glass?
  • Douglas L.
    Very Frequent User
    • September 1, 2003
    • 296

    #2
    Re: C2 Side window and vent window butyl

    Try Davies Corvette in Florida. Not sure what you mean by butyl. The orignial channel bedding material is a black tar-type tape. It comes in different thicknesses. Coat the tape with a light coat of motor oil, set the glass into the channel, and give it time to set up. Search Corvette Fever - there was a past article showing how.

    Comment

    • Louis C.
      Expired
      • October 1, 1988
      • 60

      #3
      Re: C2 Side window and vent window butyl

      OK, found a source and sizes. The chevrolet parts book (section 10.685) shows the "fillers" as .032 and .047. Restoration Specialties (814-467-9842) sells glass setting tape in various thicknesses. For the window .032 = 1/32, and for the vent glass .047 = 3/64. They sell both at .60 foot.. I measured both glass and channels, divided by two and verified these will work.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"