1958 to 1962 Corvette Fender - NCRS Discussion Boards

1958 to 1962 Corvette Fender

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ray C.
    Extremely Frequent Poster
    • June 30, 2001
    • 1132

    1958 to 1962 Corvette Fender

    What are the differences between the 1958 to 1961 and the 1962 fender top panel? I am only referring to the top section from the bonding strip to the hood surround.

    Thanks for any information!

    Ray
    Ray Carney
    1961 Sateen Silver 270-HP
    1961 Fawn Beige 315-HP
  • William C.
    NCRS Past President
    • May 31, 1975
    • 6037

    #2
    Re: 1958 to 1962 Corvette Fender

    I don't understand, are you looking at the hood surround, or the two lower sections? Either way. the biggest difference is the stainless trim on the sides of the car require a flat surface for mounting in '58-61, and the '62 has a feature line around the cove that is molded into the fender. They are not interchangable if trying to retain the original configuration.
    Bill Clupper #618

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"