The JG specifies that the knock off hammer has "no welds" however if one looks at the drawing for pn 3859067 (Noland page 300) it does call for a weld and if referenced as used till mid 1965. Now that's the hammer I have, but it will fail judging unless some other information is gathered.
So does anyone have any dated information showing that the 3859067 hammer could have been used on a Mar 64 car.
Note the next design, 3871308, did not have the weld.
Thanks
Alan
So does anyone have any dated information showing that the 3859067 hammer could have been used on a Mar 64 car.
Note the next design, 3871308, did not have the weld.
Thanks
Alan