Regrinding a Camshaft????? - NCRS Discussion Boards

Regrinding a Camshaft?????

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    #46
    not all chevy cam bearing both BBC and SBC

    have the same outside diameter. #2 and #5 both have the same outside diameter and can be interchanged EXCEPT in 65/66 BBC. some also have different oiling holes for the front bearing to get more oil to the thrust surface of the cam gear.

    Comment

    • Clem Z.
      Expired
      • January 1, 2006
      • 9427

      #47
      you MUST used a grooved cam in any 65/66

      block along with the rear cam bearing with 3 holes to get oil to the lifters

      Comment

      • Eugene B.
        Very Frequent User
        • May 31, 1988
        • 710

        #48
        Re: you MUST used a grooved cam in any 65/66

        Clem,
        I read the original posts on this subject and they got me to thinking about my replacement camshaft. After reading your post this morning, I went to the garage to look at my parts archive.

        My original '65, 250HP camshaft does not have a groove around the back cam bearing surface. What am I missing or not understanding about this post.

        Best regards,
        Gene

        Comment

        • Clem Z.
          Expired
          • January 1, 2006
          • 9427

          #49
          the grooved cam only applies to big blocks *NM*

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"