C1 Bumper shims - NCRS Discussion Boards

C1 Bumper shims

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John M.
    Expired
    • January 1, 1999
    • 1553

    C1 Bumper shims

    I am doing the final assembly on my 60 and have run out of shims to align my bumpers. I have tried all the normal aftermarket suppliers or automotive hardware and have not been able to find anything that look the same or has the right size slot. The shim I am looking for is about 1 1/2" square, 1/8" thick and has a 7/16" slot in it. Does anyone know if GM still sells this part and if so what part # is it sold under? Thanks, John Mc Graw
  • David K.
    Expired
    • February 1, 1976
    • 592

    #2
    Re: C1 Bumper shims

    John, if you get desperate try a body shop, sometimes the older the better.Of, course these will be used ones. But, if you get bored, you can restore these too.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"