Replacing C3 dash board - NCRS Discussion Boards

Replacing C3 dash board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ray Jackson

    Replacing C3 dash board

    I Just took my dash completly apart to fix stuff.
    I managed to remove the old cracked dash after removing the pillar trim
    but it was tough. To install the new dash with out damage would it be easyer if I removed the windshield or is there a trick I am missing?
    Thanks
    Ray
  • Harmon C.
    Extremely Frequent Poster
    • August 31, 1994
    • 3228

    #2
    Re: Replacing C3 dash board

    Ray
    I would not remove the windshield. The dash pad fits tight but if you get it in position as far to the drivers side as you can and spray armorall as lube on the post and end of the dash on the paassengers side with a slight bend it should slip in with no damage. Pratice with your old dash to see how it goes in. If you bring the passenger end up from below where it needs to end up you should learn the trick.
    Lyle
    Lyle

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"