C3 1970 dash dye job - NCRS Discussion Boards

C3 1970 dash dye job

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jim K.
    Very Frequent User
    • August 31, 2000
    • 554

    C3 1970 dash dye job

    I just dyed my black dash top pad bright blue using one of the major suppliers hard plastic primer and dye. Is there something to spray over the finish to protect it better? I saw Lyle's posts about reinstalling with Amorall, but I'm thinking that may adversely affest the finish. Also thinking of heating the middle section with a halogen light to get a little flex on it to get by the pilar... we'll see what happens
  • Tony Merendino

    #2
    Re: C3 1970 dash dye job

    I don't know about protecting the finish but I would suggest that you get the dash pad nice and warm before trying to flex it past the pillars. Don't ask me how I know.

    Comment

    • Jim K.
      Very Frequent User
      • August 31, 2000
      • 554

      #3
      Re: C3 1970 dash dye job

      I won't ask! Yes planning on heating graduly on both sides just enoigh to get some flex in it, but not too much...

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"