63 Wiring harness, wire ID

[Steve D.]

The photo shows some single dangling wires. I determined that the brown connects to the tan for the horn, but I haven't been able to identify the light green nad the black. The wiring diagram has a black wire for "park brake warning light", but the black wire has a female blade receptor not a bulb socket. I can't locate the light green wire on the diagram. Help please.

steve

[William C.]

Photo is red X *NM*

[Harry Sadlock]

Re: 63 Wiring harness, wire ID

Steve, I hate going out to the garage in the winter in New Hampshire. Anyway, the brown wire connects to the horn wire from the steering column. The green wire goes to one side of the emergency brake switch.

Still having fun....

Harry

[Steve D.]

Re: 63 Wiring harness, wire ID

Harry

What is this about Winter? My thermometer says 68 degrees.

I found the park brake alarm switch on the wiring diagram and behold, it shows a light green wire going to one side and a black wire going from the other side to a "park alarm bulb". Apparently, I am missing the park brake warning switch, but I can't picture how it sets up and where the tattle tale bulb is located. I couldn't locate the switch in the AIM or the Service Manual.

Steve

[John H.]

Re: 63 Wiring harness, wire ID

Steve -

The parking brake warning switch is shown in the assembly manual in UPC 12, Sheet B3.00.

[Steve D.]

Re: 63 Wiring harness, wire ID

John

Thank you. I scoured Section 12, but missed it anyway.

Steve