c2 oil pan plug

[HAROLD WILLIAMS]

what size is the head of the oil pan drain plug on a 1964 , and is there a (A)
or tooling marks on the head..

[Jack H.]

Re: c2 oil pan plug

The hex head is 7/8-inch and there were quite a few qualified suppliers with factory original headmarks including: A, Circle-A, TR, F-C, and L. The only one that's currently being reproduced is the Circle-A version...

[William C.]

Re: c2 oil pan plug

7/8 inch hex, and generally an A, although others were used, the current JG may call for another headmark, so check if you are looking for judging points. I pulled one out of an original SHP pan this summer with the "A".

[John D.]

Re: c2 oil pan plug

Harold, Long Island a super repro plug. Circle with an A for Ten bucks. I compared it to an Original and it's right on. Dip it in orange paint and you are in. Or you could go on ebay and pay mega bucks for an original. Been there. John

[Jim R.]

Re: c2 oil pan plug

harry my 65 has the original short 7/8 plug and there is no head marking on it .jim