69 shock ID labels

[Greg L.]

What would be the correct two letter lable codes for the front and rear shocks for a 69 with standard suspension?

Thank you kindly.

Greg Linton
#45455

[Joe L.]

Re: 69 shock ID labels

Greg-----

"VR"---front

"VS"---rear

[Greg L.]

Re: 69 shock ID labels

Thanks Joe...that's what I was afraid of...

Just last week I applied the decals that I got from paragon to my freshly painted shocks and just tonight noticed in my TIM&JG that they are wrong. I should have known better because this isn't the first time I've had issues with paragons parts!! Stupid ole me just stuck them on as per their packaging label...not much I can do now though.

Any idea on how I can remove these junk labels without hurting the paint?

Would you happen to know where I could find the correct ones?

[Paul O.]

Re: 69 shock ID labels

Greg send me a self address stamped return envelope and will mail you some that I made off my printer they are not perfect but the price is right. Paul
Paul Oslansky
684 Brandy Way
Cincinnat, Ohio 45244 513-965-8009

[Jim T.]

Re: 69 shock ID labels

Can new labels be applied directly on top of your newly installed labels without being noticed? Generally WD-40 will loosen labels and bumper stickers.

[Greg L.]

Re: 69 shock ID labels

Thanks a bunch Paul, I'll do that!

Jim I'm not sure what WD-40 would do to the paint because I think the paint is still to fresh and it might come off too. As long as Paul's lables are the same size or even a tad larger than the wrong ones that were sold to me, placing them over top just might do the trick.

[Jack H.]

Re: 69 shock ID labels

The paint should 'laugh' at the WD-40 + take on a nice bright shine to boot!

[Terry M.]

Re: 69 shock ID labels

Generally alcohol will dissolve adhesive. I doubt alcohol -- in the form of the commonly available isopropyl -- would damage the paint, but testing a small less visible area (like on the rear inboard top) would be best for anything you try to use to remove the label.

[Patrick H.]

Re: 69 shock ID labels

Paul,

Come on, it's not that hard to make them perfect.

Patrick

[Greg L.]

Re: 69 shock ID labels

Thanks guys. Actually the labels came off with no problems and the WD-40 removed all the remaining residue too.