C1 Brake Fluid Flush - NCRS Discussion Boards

C1 Brake Fluid Flush

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Christopher R.
    Extremely Frequent Poster
    • March 31, 1975
    • 1599
    #1

    C1 Brake Fluid Flush

    I'm replacing the master cylinder and 1 of the brake lines on my '62. It has DOT-5 (silicone) brake fluid. Might as well flush the system too, seeing that I'm there. How much fluid am I going to need?
    Tags: None
      • Top
    • Donald B.
      Expired
      • May 31, 2004
      • 299
      #2
      Re: C1 Brake Fluid Flush

      A quart should be more than enough.
        • Top

        Comment

        • Wayne K.
          Expired
          • December 1, 1999
          • 1030
          #3
          Re: C1 Brake Fluid Flush

          Chris,

          You probably know this but you didn't mention the replacement fluid. If it had DOT-5 you should stay with that and the master cylinder should also have been assembled using DOT-5.

          Wayne
            • Top

            Comment

            Previous template Next
            Working...

            Debug Information

            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"