Help identify C2 distributor cover... - NCRS Discussion Boards

Help identify C2 distributor cover...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Terry F.
    Expired
    • September 30, 1992
    • 2061
    #1

    Help identify C2 distributor cover...

    Hi, I don't know mid-year stuff very well at all. I have a mid-year stainless distributor shield (rather nice I might add ). I want to figure out what year it belongs on. It appears to have come off a FI car because it has a two possition clip (cad plated spring steel) on the front that is in the FI postion. It also has a ground clip on the back side which is chrome plated. It has two plastic rivets on the top to hold the insulator sheet in place. Any, chance this is enough information to identify it?? I am thinking 1965 or 1964?? Thanks, Terry
    Tags: None
      • Top
    • Bill S.
      Expired
      • January 31, 2007
      • 396
      #2
      Re: Help identify C2 distributor cover...

      search around jan i did a ton of correspondence on this. there was a good drawing on 2 types as well posted. many had FI but this refered to where to put the ground clip.
        • Top

        Comment

        • Terry F.
          Expired
          • September 30, 1992
          • 2061
          #3
          Thanks, Terry *NM*

            • Top

            Comment

            • Terry F.
              Expired
              • September 30, 1992
              • 2061
              #4
              Re: Help identify C2 distributor cover...

              I read that thread. Mine looks like the one in that auction but my grounding tabs are all there. Any chance I could send you some pictures of it when I get a chance. If possible, email me at tfringo@aol.com and when I get off work I will try to send some picture of it and the supports. I would like to identify it if possible. I think it is a pretty nice original item. Definitely stainless. Take care, Terry
                • Top

                Comment

                • Bill S.
                  Expired
                  • January 31, 2007
                  • 396
                  #5
                  Re: Help identify C2 distributor cover...

                  look in the paragon catalog, that is a great way to id parts as the have more pictures with years id'd than others.
                    • Top

                    Comment

                    • Terry F.
                      Expired
                      • September 30, 1992
                      • 2061
                      #6
                      Re: Help identify C2 distributor cover...

                      I don't have a C2 catalog from them. Should get one for the heck of it...

                      Terry
                        • Top

                        Comment

                        • Alan Drake
                          #7
                          Re: Help identify C2 distributor cover...

                          Great article in Restorer - "1963-67 Corvette 327 Engine Radio Ignition Shielding Wire Shields & Routing Supports" by John Amgwert. Do not know what Vol or Year, I found on the 63/64 CD edition. Also look at Nolands Adam book, has some drawings.
                          To determine what year you have many details will be needed and even after verifying all of them you may still be confused, as I still am.
                            • Top

                            Comment

                            • Terry F.
                              Expired
                              • September 30, 1992
                              • 2061
                              #8
                              Re: Help identify C2 distributor cover...

                              Thanks, Terry
                                • Top

                                Comment

                                • Rob A.
                                  Expired
                                  • December 1, 1991
                                  • 2126
                                  #9
                                  Re: Help identify C2 distributor cover...

                                  I have some good info on these...if you email me a pic of it, I can tell you what year(s) it is from.
                                    • Top

                                    Comment

                                    • Bill S.
                                      Expired
                                      • January 31, 2007
                                      • 396
                                      #10
                                      Re: Help identify C2 distributor cover...

                                      you can down load a catalog fro paragon. i am really happy with them. bill
                                        • Top

                                        Comment

                                        Previous template Next
                                        Working...

                                        Debug Information

                                        Searching...Please wait.
                                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                        Please push the back button and reload the previous window.'
                                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                        Please push the back button and reload the previous window.'
                                        An internal error has occurred and the module cannot be displayed.
                                        There are no results that meet this criteria.
                                        Search Result for "|||"