C1 Trunk Lock - NCRS Discussion Boards

C1 Trunk Lock

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mark Radin

    C1 Trunk Lock

    I just noticed the lock and bezel on the '59 I am working on is not recessed into the panel. Does this mean the trunk is not orginal, or has it just been modified?

    Thanks,

    Mark
  • Brad K.
    Expired
    • August 31, 1990
    • 414

    #2
    Re: C1 Trunk Lock

    If what you are saying is......The lock assembly face, when it is in place is NOT almost 90 degrees to the ground (as it should be) then what you say is true. The trunk lid is an aftermarket one and not original. If the lock assembly face follows the contour of the trunk lid and faces up into the air then you've got an aftermarket as well. I'd then say that you'd better be looking for a different trunk lid, which can be found on e-bay

    This MAY be the reason why you've asked the next question about the trunk lid being slightly off-center

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"