72 Alarm Problem - NCRS Discussion Boards

72 Alarm Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Matthew S.
    Expired
    • August 31, 2005
    • 64

    72 Alarm Problem

    I've got a problem with the alarm in my 72 that I can't quite figure out. The alarm works like it's supposed to (arm it and open a door or the hood and it sounds) except that instead of the horn blowing like a horn, all I hear is clicking through the horn (so I guess the flasher works). It's trying to sound but it seems like it's not getting enough power to drive the horn. Sometimes the horn will sound but not often and not for very long (three or times and then it's back to the clicking). Here's what I've done so far:

    - charged the battery to a full charge
    - rebuilt the horn
    - tested the horn and it works perfectly
    - installed a new alarm switch
    - removed the paint on the horn where the ground wire attaches
    - replaced the ground wire and power wire connectors
    - removed the connectors on the flasher and the relay and reinstalled them
    - replaced the flasher with a new flasher from GM (part #491391)

    The only thing I haven't changed at this point is the relay. Does this sound like a relay problem and if so is a replacement available from GM?

    Thanks for any help.

    Matt
  • Harmon C.
    Extremely Frequent Poster
    • August 31, 1994
    • 3228

    #2
    Re: 72 Alarm Problem

    Matt

    I have had the same problem the alarm horn works fine when tested on the battery but not when installed. I have changed the horn and the problem went away. I think the horn wire puts out less output than the direct test on the battery or the horn adjustment needs tweaked.
    Lyle
    Lyle

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"