no hood plate adjusment left do i need to slot - NCRS Discussion Boards

no hood plate adjusment left do i need to slot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nancy charles

    no hood plate adjusment left do i need to slot

    hood pin on left side is hitting the lock plate as it enters .moved hood plate all the way left still hitting about half way up the pin ? do i need to slot the hood plate. will i lose points for this ? i have the correct gaps when hood is closed . hood pin on right is dead center in plate............THANKS
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: no hood plate adjusment left do i need to slot

    what year?

    Comment

    • nancy charles

      #3
      Re: no hood plate adjusment left do i need to slot

      1963 roadster ....................SORRY

      Comment

      • Mike McKown

        #4
        Re: no hood plate adjusment left do i need to slot

        The hood latch is ONLY to hold the hood down. Not to obtain margins. That's what is sounds like is happening here. I'd guess your margin across the front isn't so good with the hood just sitting on the latches. Probably wide at the right front. Take the left latch all the way off and read your margins. Adjust margins as required and then reinstall the left latch.

        Comment

        • nancy charles

          #5
          Re: no hood plate adjusment left do i need to slot

          As i stated ( i have all the correct margins allthe way around .that is not the problem.............. NANCY

          Comment

          • nancy charles

            #6
            Re: no hood plate adjusment left do i need to slot

            As i stated ( i have all the correct margins allthe way around .that is not the problem.............. NANCY

            Comment

            • Mike M.
              NCRS Past President
              • May 31, 1974
              • 8365

              #7
              Re: no hood plate adjusment left do i need to slot

              nancy: i'd remove both hood pins and lay the hood down and look at the gap between front of hood and the edge of the top surround. just a small adjustment of the hood to surround gap will result in a significant shift of the hood ad it left side gap to the top surround. let us know what gives. mike

              Comment

              • nancy charles

                #8
                Re: no hood plate adjusment left do i need to slot

                AGAIN WITH HOOD DOWN GAPS ARE EXCELLANT ......................THANKS

                Comment

                • Mike McKown

                  #9
                  Re: no hood plate adjusment left do i need to slot

                  If you're happy, I'm happy. But you're hood can't be happy if it's hitting the latches as you describe.

                  No need to slot the latches unless your car has been wrecked and improperly repaired, has faulty parts installed or a faulty installer put the hood on.

                  Comment

                  • Chris Patrick

                    #10
                    Re: no hood plate adjustment left do i need to slo

                    Check the pin. You might try putting the left pin in the right spot and vice versa. Pins can get bent and be just enough off to hit like this, yet it is hard to see. You can try turning the pin a quarter turn and see if that helps.

                    Comment

                    • nancy charles

                      #11
                      Re: no hood plate adjustment left do i need to slo

                      I'd LIKE TO THANK PAT FOR THE TIP ON ADJ. PIN, WORKS MUCH BETTER .........THANKS ALL

                      Comment

                      Working...

                      Debug Information

                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"