'72 LT-1 oil pan source

[Billy Olson]

I've decided to replace my oil pan. Is this one on e-bay correct? I checked my judging guide but did not notice a part number for the oil pan. It doesn't quite look like the one on now (see picture in previous post from a few days ago). It seems like the major suppliers only sell the non SHP versions. Is the only difference the internal baffels? Is there another source for a reproduction pan?. As always, thanks for any help.

Billy




http://cgi.ebay.com/ebaymotors/NOS-Corvette-Hi-Per

[Billy Olson]

Re: '72 LT-1 oil pan source - correct link

http://cgi.ebay.com/ebaymotors/NOS-Corvette-Hi-Performance-Small-Block-Oil-Pan_W0QQcmdZViewItemQQcategoryZ38657QQihZ010QQitemZ200118516810QQrdZ1

http://cgi.ebay.com/ebaymotors/NOS-Corvette-Hi-Performance-Small-Block-Oil-Pan_W0QQcmdZViewItemQQcategoryZ38657QQihZ010QQitemZ200118516810QQrdZ1

[Joe L.]

Re: '72 LT-1 oil pan source - correct link

Billy-----

This is a 6 quart pan. The only LT-1's it was used on were some early 1970's without power steering and 70-72 ZR-1. You require the 5 quart pan.

I understand that Keen Parts now has available an accurate reproduction of the 63-74 5 quart Corvette oil pan.

[Dick W.]

Re: '72 LT-1 oil pan source - correct link

Keen Parts has a new one for several dollars less that the one on ebabes. Looks identical to the original!

www.keenparts.com

[Billy Olson]

Re: '72 LT-1 oil pan source - correct link

Thanks Joe and Duke.

Does the Keen Parts pan have the internal baffles? It does not say on their web site.

Billy

[Dick W.]

Re: '72 LT-1 oil pan source - correct link

I viewed the pan at McDorman's show last year. To the best of my memory it had the baffles

[Billy Olson]

Re: '72 LT-1 oil pan source - correct link

Thanks Dick. Sorry about the Dick/Duke confusion there.....