'67 Distributor band - NCRS Discussion Boards

'67 Distributor band

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dave M.
    Expired
    • June 30, 1999
    • 58

    '67 Distributor band

    Did all 427/435 HP distributor bands (258) have the red anodizied finish on them and if so was it red on both sides?
    Thanks for your time
  • Wayne M.
    Expired
    • March 1, 1980
    • 6414

    #2
    Here's a survey of mine (but no "258")

    Dave -- Am surprised nobody has responded; can only assume that the '67 TIM&JG does not specify (same situation with '65 manual).

    My originals (ie. not later over-the-counter):

    Red side out:
    1111060 4C30 (1964 model year), 1111296 8B26 (1968), 1111267 9D14 (1969)
    Red side in:
    1112021 0B23 (1970), 1112038 0J3 (1971)

    Probable OTC distr's:

    All silver band (both sides):
    1111157 4K9 (1974 ? assy), 1111263 6J15 (1976 or '86 ?)
    All red (both sides):
    Dealer OTC purchase by me in 1980, 1111069 0D23 (1970 or 1980 ?)

    So what to conclude ? Maybe your 258 should be red outside band. Or maybe there was no "rule" at all, and was random.

    Comment

    • Joel Falk

      #3
      Re: Here's a survey of mine (but no "258")

      My 258 is red outside. I have not seen the underside.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"