65 FI Air Cleaner Adaptor

[George C.]

This may be a very strange question.

I have an adaptor for a 380 FI unit that is missing the tube/pipe for the crankcase vent. It is also missing the small vent tube.

Does anyone have a blueprint or a measured drawing to assit me in fabricating a new tube/pipe?

I have a very generous offer from John D to loan me an adaptor for measurements, but thought I would ask for a print.

Thank you in advance,
George

[John D.]

Re: 65 FI Air Cleaner Adaptor

George, Open the Restore and look for Brian Futo's address,etc. Brian may have a print. Sorry I didn't think of that before. Best to email him or write him and mention my name also. He's my mentor. John

[George C.]

Re: 65 FI Air Cleaner Adaptor

John,
Guess I am on my own with this one. I need to order up the restorer CD. I only have about 4 years of hard copy here, but I am looking though them this weekend.

Thanks again,
George

[John D.]

Re: 65 FI Air Cleaner Adaptor

George, I may not explained myself well as usual. I don't ever remember anything in the "Restorer" about 7380 air cleaner adapters. Nothing with measurements for sure. I was just saying that Brian Futo may have a copy of the original print of that part. I assume you get the magazine??? If so his name can be found in the first couple of pages as the NCRS fuel injection guru. Call me if you have a problem. I don't think that Futo looks in on our chatter. John D.

[George C.]

Re: 65 FI Air Cleaner Adaptor

John,
No problem, now I get it. I have the email address and will send a note off right away.

Thank you,

George