C1 - SBC - Help ID camshaft... - NCRS Discussion Boards

C1 - SBC - Help ID camshaft...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dennis C.
    NCRS Past Judging Chairman
    • January 1, 1984
    • 2409

    C1 - SBC - Help ID camshaft...

    ...I have recently rebuilt my 1962 327 300HP engine. I am curious about the camshaft that came out of it. Previous owner "rebuilt" the engine - possibly about 2000 era. Markings and measurements on cam that might help ID it, I hope:

    Stamped on distributor end of cam:

    11-23-00
    200042
    871

    Cast on front end of cam behind fuel pump lobe:
    L9
    21

    Cast on distributor end of cam:
    1579
    D8
    GWC

    Overall, the lobes measure:
    1/2 = 1.520"
    1/2 = 1.537

    Appreciate any help... Thanks, Dennis
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"