69 Frigidaire compressor - NCRS Discussion Boards

69 Frigidaire compressor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Roberto L.
    Expired
    • January 1, 1998
    • 523
    #1

    69 Frigidaire compressor

    Tags: None
      • Top
    • Jim T.
      Expired
      • March 1, 1993
      • 5351
      #2
      Re: 69 Frigidaire compressor

      Roberto I was going to tell you to go to Auto Zone and put down a deposit to borrow the tool to reinstall the drive hub. However I see from your profile you are not in the USA. I don't know the thread size of the front shaft.
        • Top

        Comment

        • Wayne M.
          Expired
          • March 1, 1980
          • 6414
          #3
          Here's the Tool --- shaft is 3/8" - 24 thrds/inch

          Which is a standard (fine) thread. I took the bolt shown in the pic and threaded it both into the nose of the tool; and then the tool onto the compressor drive shaft, just to be sure that they were same thread size.

          The tool is "Robinair" from their 10500 series. It's the equivalent of Kent-Moore J-9480 and 9480-2. The ball-bearing collar rides between it and the large hex.




          Attached Files
            • Top

            Comment

            • Roberto L.
              Expired
              • January 1, 1998
              • 523
              #4
              Re: 69 Frigidaire compressor

              Thanks Jim and Wayne, good picture, apparently the size is the same mentioned, 3/8" NF which means 24 lines per inch.

              Roberto, NCRS 30019, RMC
                • Top

                Comment

                Previous template Next
                Working...

                Debug Information

                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"