weather strip

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Don B.
    Expired
    • May 12, 2008
    • 132

    #1

    weather strip

    On a '56, does the hood ledge weather strip (at the rear of the hood) adhere to the body or the hood?? I have yet to see a picture of this. I assume that it is glued in place where ever it goes.
    TNX, Don
  • Wayne P.
    Extremely Frequent Poster
    • September 1, 1975
    • 1025

    #2
    Re: weather strip

    Glued to the hood edge. Make sure it's turned in the proper direction.

    Comment

    • Don B.
      Expired
      • May 12, 2008
      • 132

      #3
      Re: weather strip

      Thanks, Wayne. Can I assume the proper direction is so that the protruding bump mates with the indentation on the body ledge?? (ie, the protruding bump would be toward the rear of the car.)

      Comment

      • John H.
        Beyond Control Poster
        • December 1, 1997
        • 16513

        #4
        Re: weather strip

        Don -

        Correct orientation of the weatherstrip is shown in the Assembly Manual - section 11, sheet 6.00.

        Comment

        • Don B.
          Expired
          • May 12, 2008
          • 132

          #5
          Re: weather strip

          Thanks for the input, John... I didn't happen to see that illustration and will look again.

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"