small block pcv hose

[Lou A.]

hello all i need some clarity on my 67 300 hp is the pcv hose molded at the carb to pcv and ribbed, or is it straight hose with gm logos to carb and pcv thanks

[John H.]

Re: small block pcv hose

Not molded, no ribs.

[John H.]

Re: small block pcv hose - CORRECTION

"Upon further review" , I believe they were molded, and had three ribs; that's what Doc Rebuild shows, and he has the GM drawings.

[Peter L.]

Re: small block pcv hose - CORRECTION

John - I was hoping the ones on my 66 and 67 base motor cars were the originals since they are molded with an approx 90 degree angle at the carb attachment end; but neither of the them have ribs. They are smooth. Perhaps the GM drawing have been Doctored Pete