C1 Banjo & bearing retainers. - NCRS Discussion Boards

C1 Banjo & bearing retainers.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Terry D.
    Extremely Frequent Poster
    • May 31, 1987
    • 2690

    C1 Banjo & bearing retainers.

    A while back Roy posted pictures from an article showing the differences in C1 banjos and bearing retainers. I have in my growing senility lost them, pictures are not still in the archives, if someone has them could you please e-mail them to me?
    Thanks
    Terry
  • Terry D.
    Extremely Frequent Poster
    • May 31, 1987
    • 2690

    #2
    Thanks to those who responded *NM*

    Comment

    • Bill B.
      Expired
      • September 30, 2002
      • 351

      #3
      Re: C1 Banjo & bearing retainers.

      Terry, if you received any info I would really, really appreciate reading or seeing it. This Banjo and retainer stuff is getting me semi-frustrated. My next issue in this area is going to be AXLE lengths (posi vs nonposi and shallow vs deep retainers) and the measurement span between backing plates on a shallow vs deep retainer. To me, the unique aspect of our C1's is the "solid axle". And, I haven't been able to find a tremendous amount of readily available information or experts in this particular area. I know they out there somewhere?

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"