Wiring harness clip bond - NCRS Discussion Boards

Wiring harness clip bond

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Albert P.
    Expired
    • April 1, 2006
    • 205

    Wiring harness clip bond

    AIM for 1964 shows clip on driver side fender for headlight harness as being bonded to skirt;what should be used to bond this clip to the skirt?Thanks.
  • Albert P.
    Expired
    • April 1, 2006
    • 205

    #2
    Re: Wiring harness clip bond

    Correction, this clip holds the headlight and alternator harness;thanks.

    Comment

    • John O.
      Very Frequent User
      • May 31, 1998
      • 480

      #3
      Re: Wiring harness clip bond

      Hi Garth

      On my 62, I used JB weld to hold my clips for my headlight harness. Worked great.

      Good luck...John

      Comment

      • Wayne W.
        Extremely Frequent Poster
        • April 30, 1982
        • 3605

        #4
        Re: Wiring harness clip bond

        The factory used the same material as used on the body. Polyester puddy.

        Comment

        • Albert P.
          Expired
          • April 1, 2006
          • 205

          #5
          **NM Thanks for info onWiring harness clip bond *NM*

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"