Convertible Top Frame Mounting Screw

[Kirk McHugh]

Does anyone have a picture of the correct style screw used to attach a 67 convertible top to the car? The repros I got don't seem to even be close to the three currently on my car (all I was missing was 1 on the left side, which I hoped to replace with a correct looking repro). Is there a correct head stamp for a 67? Thanks.

[John Hinckley (29964)]

Re: Convertible Top Frame Mounting Screw

Kirk -

Those bolts have a recessed hex head and captured conical washer; "EL" within concentric circles is a typical headmark, although others may also have been used. Photo below courtesy of Michael Hanson.

[John Hinckley (29964)]

Re: Convertible Top Frame Mounting Screw

Kirk -

Those bolts have a recessed hex head and captured conical washer; "EL" within concentric circles is a typical headmark, although others may also have been used. Photo below courtesy of Michael Hanson.

[James West (18379)]

I've got a bunch of them! *NM*

[James West (18379)]

I've got a bunch of them! *NM*

[Gerard Fuccillo (42179)]

Re: Convertible Top Frame Mounting Screw

Kirk,

Paper impression from my 67. Same as the one John posted. EL markings


Jerry Fuccillo

[Gerard Fuccillo (42179)]

Re: Convertible Top Frame Mounting Screw

Kirk,

Paper impression from my 67. Same as the one John posted. EL markings


Jerry Fuccillo