'69 measurement question

[Greg R.]

Is there a website or printed material that documents (for 1969) the ride height in inches at the front and rear quarters when measured from the ground up ?
Thanks

[Verle R.]

Re: '69 measurement question

You might look in the Assembly Instruction Manual (AIM)

Verle

[Verle R.]

Re: '69 measurement question

You might look in the Assembly Instruction Manual (AIM)

Verle

[Greg R.]

Re: '69 measurement question

I must be dense tonight...I looked in the Assembly Manual tonight and could not decifer the measurments given...did not make sense to me.

[Greg R.]

Re: '69 measurement question

I must be dense tonight...I looked in the Assembly Manual tonight and could not decifer the measurments given...did not make sense to me.

[Jim T.]

Re: '69 measurement question

Pictures with measurements are in the Chassis Service Manual for the 1969 Corvette.

[Jim T.]

Re: '69 measurement question

Pictures with measurements are in the Chassis Service Manual for the 1969 Corvette.

[John H.]

Re: '69 measurement question

Front and rear ride heights are shown as "Z" height (front) and "D" height (rear), which measures spring height at design load, independent of tire size or any other variables; those numbers and the suspension points to measure to ground are shown in UPC 3 (front) and UPC 4 (rear) in the assembly manual.

[John H.]

Re: '69 measurement question

Front and rear ride heights are shown as "Z" height (front) and "D" height (rear), which measures spring height at design load, independent of tire size or any other variables; those numbers and the suspension points to measure to ground are shown in UPC 3 (front) and UPC 4 (rear) in the assembly manual.