c2 valve cover bolt paint - NCRS Discussion Boards

c2 valve cover bolt paint

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Keith G.
    Expired
    • October 31, 2006
    • 316

    c2 valve cover bolt paint

    The bolts on the grounds are none painted, what about the little piece under the ground?
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: c2 valve cover bolt paint

    Keith-----

    If you're talking about the retainers (roughly triangular stamped steel pieces under all valve cover bolts), these should show evidence of paint. While the screws were exchanged at St. Louis for longer ones on the ground wire positions, the retainers were just as they left Tonawanda.
    In Appreciation of John Hinckley

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193

      #3
      Re: c2 valve cover bolt paint

      Keith-----

      If you're talking about the retainers (roughly triangular stamped steel pieces under all valve cover bolts), these should show evidence of paint. While the screws were exchanged at St. Louis for longer ones on the ground wire positions, the retainers were just as they left Tonawanda.
      In Appreciation of John Hinckley

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"