C2 Breather Vent Bolt - NCRS Discussion Boards

C2 Breather Vent Bolt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ralph E.
    Expired
    • February 1, 2002
    • 905

    C2 Breather Vent Bolt

    Misplaced the breather vent bolt which attaches the metal vent tube to the manifold.
    What type of bolt should it be "TR" ?
  • Allan J. Wicklund

    #2
    Re: C2 Breather Vent Bolt

    Look in your LICS Catalog.

    Comment

    • Ralph E.
      Expired
      • February 1, 2002
      • 905

      #3
      Re: C2 Breather Vent Bolt

      Where does it indicate the bolt type?

      Comment

      • Joe R.
        Extremely Frequent Poster
        • March 1, 2002
        • 1356

        #4
        Re: C2 Breather Vent Bolt

        The reproduction bolt that I purchased from Paragon has a triangle marking. One judge made a deduction for that bolt because, he claimed, the triangle marking did not appear on that bolt for 1967.

        I'm not sure he was correct, but since I still had my original bolt with the RBW marking, I had it replated and put it back on the car. A photo of my replated original is attached.

        I believe that other head marks were also used, so this is just the one that happened to be on my car.




        Attached Files

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"