62 hardtop w/s installation question - NCRS Discussion Boards

62 hardtop w/s installation question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Willard M.
    Very Frequent User
    • August 31, 1979
    • 422

    62 hardtop w/s installation question

    I finally have decided to replace the front header weatherstrip on the hardtop of my 62. What is the procedure to remove the old one? There appear to be rivits down through a small plate every few inches basically holding the weatherstrip to the hardtop. What is the best way to remove these so that the old weatherstrip can be removed?

    Bill #2659
  • Greg Pic 39571

    #2
    Re: 62 hardtop w/s installation question

    just use a very thin slotted screw driver, tap with a light hammer to raise the rivit, then you can use a good pair of plyers to pull the rivit out. Once out mark the holes with a pencil.

    Comment

    • Willard M.
      Very Frequent User
      • August 31, 1979
      • 422

      #3
      Re: 62 hardtop w/s installation question

      Thanks-I will tackle the job this afternoon.

      Bill #2659

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"