fuse box sqrews for a midyear - NCRS Discussion Boards

fuse box sqrews for a midyear

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John S.
    Expired
    • July 31, 1990
    • 292

    fuse box sqrews for a midyear

    Can any one tell me the length of the sqrews that hold the fuse box in place on a midyear? thanks for any help john
  • Dan H.
    Extremely Frequent Poster
    • July 31, 1977
    • 1365

    #2
    Re: fuse box sqrews for a midyear

    Have an old one from a 64, it's 1-5/8" with 1/4" flange head screw head. Goes through both halves of the fuse blocks to clamp them together.
    Dan
    1964 Red FI Coupe, DUNTOV '09
    Drove the 64 over 5000 miles to three Regionals and the San Jose National, one dust storm and 40 lbs of bugs!

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193

      #3
      Re: fuse box sqrews for a midyear

      Dan and John-----

      1963-66 used the same screw, GM #3776399, so it should be the applicable to all these years. Sometime in 1967 the screw part number changed to GM #3380425, but I don't think the actual configuration changed very much. Neither screw was ever available in SERVICE.
      In Appreciation of John Hinckley

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"