Steering knuckle gasket.... - NCRS Discussion Boards

Steering knuckle gasket....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bill Dangora

    Steering knuckle gasket....

    Should the steering knuckle gasket (slips over the front spindle on the steering knuckle, the disc brake splash shield then bolts to the steering knuckle, followed by the hub/rotor assembly) be replaced periodically?

    Does anyone have a part number for it?

    Is there a preferred replacement?

    Thanks in advance for any and all comments.

    Bill
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: Steering knuckle gasket....

    Bill------

    The gasket only needs to be replaced when you have the front knuckle and splash shield disassembled for other reasons. It does not need to be periodically replaced otherwise. It's still available from GM under GM #3953431 for $3.66/each.
    In Appreciation of John Hinckley

    Comment

    • Bill Dangora

      #3
      Re: Steering knuckle gasket....

      Thank you for the information, Joe.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"