Trans rebuild/refresh - NCRS Discussion Boards

Trans rebuild/refresh

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dennis F. King
    #1

    Trans rebuild/refresh

    Can anyone recommend a proven shop in the mid-atlantic/Wash. D.C. area who could inspect and if necessary rebuild my Muncie. If rebuild is necessary and I provide the parts who carries the highest quility parts. I understand a lot of Chinese stuff is floating around out there. I'm not having any problems, it's just got 184K miles and I'll be pulling the engine and trans to clean things up...now is the time.
    Thanks, Dennis
    Tags: None
      • Top
    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193
      #2
      Re: Trans rebuild/refresh

      Larry-----

      Ed Hartnett who is located in Pennsylvania is going to be your best bet, as far as I'm concerned. Unfortunately, I don't have Ed's number handy, but if no one else posts it, I'll post it this evening.

      As far as parts go, virtually all Muncie parts are now discontinued from GM. The only things left are small parts, bearings and gaskets. The replacement Delco bearings are usually of "foreign" manufacture. If of Japanese manufacture, they'll be about the best bearings in the world.
      In Appreciation of John Hinckley
        • Top

        Comment

        • Larry Low
          #3
          Re: Trans rebuild/refresh

          Dennis, I just made a recent post stating I sell a Muncie Rebuild Guide called EasyStep I sell on EBAY. It sells for a flat rate of $25. shipping included. The Muncie is very simple to rebuild, even if you have minimum mechanical ability. You could also learn something and save yourself a lot of money. I have hundreds of satisfied customers. I will send Ed's number and some parts sources. If you are willing to ship to the Atlanta area I would consider rebuilding it for you for $250. Average small parts (bearings, syncronizers, gaskets, clips) rebuild kit cost $155.
          Larry
          #37023
            • Top

            Comment

            • Daniel S.
              Very Frequent User
              • February 1, 2000
              • 164
              #4
              Re: Trans rebuild/refresh

              Ed Hartnett's 4 Speeds
              242 Pembroke Avenue
              Lansdowne, PA 19050

              610-623-9381
              EH4SPEEDS@AOL.COM
                • Top

                Comment

                • Dennis F. King
                  #5
                  Re: Trans rebuild/refresh

                  Thanks everyone!
                  Dennis
                    • Top

                    Comment

                    Previous template Next
                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"