C1 Hardtop Rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Terry B.
    Expired
    • December 1, 1988
    • 111

    #1

    C1 Hardtop Rebuild

    Just purchased "Vette" magazine for March and it contains the second part of a story on rebuilding a C1 hard top (Top of the Heap). I would be very interested in the first part that was supposedly in the Feb issue. Has anyone read it? Is it worth trying to order a back issue?
    I have already dis-assembled my top but believe the first part article could be helpful. Is anyone aware of other articles on this topic? I have the NCRS article on installing the rear window.
    This appears to be a very challenging project.
  • Ed Jennings

    #2
    Re: C1 Hardtop Rebuild

    I read the first part of the article with interest since it is something I need to do "someday". The gist of it was "don't try this at home, but if you insist, here's how".Some good information, but a three apge magazine article isn't going to serve as a service manual. Be worth reading. I'm sure they have back issues.

    Comment

    • Michael Jones

      #3
      Re: C1 Hardtop Rebuild

      It is indeed a challenging project well suited to fill those long winter nights. Mine is still in the garage in pieces in the same place it's occupied for the last two years. I haven't seen the VETTE article but I think you'll want every piece of documentation you can get your hands on. With that in mind, there are some instructions in the "1953-1962 Corvette Servicing Guide", Section 1-40 to 1-44, available from NCRS.

      Good luck,

      Michael

      Comment

      • George C.
        Expired
        • November 1, 2001
        • 568

        #4
        Re: C1 Hardtop Rebuild

        Terry,

        I think I still have the article, if you email me a fax number I will send it to you.

        George

        Comment

        • Mike G.
          Expired
          • May 1, 2001
          • 180

          #5
          If George doesn't have it, I do *NM*

          Comment

          • Don Ursery

            #6
            Re: C1 Hardtop Rebuild

            Terry, you didn't mention the year of your vette but could you do me a favor? I'm having a terrible time locating a supplier of weatherstripping for the rear bottom portion at the back window for a 1962 Hardtop. It has a "hump" and I haven't located a kit to complete my project yet. I know you're busy at this stage of the restoration, but if you hear of any kits, etc... it would be greatly appreciated. Good luck on your project. Don

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"