C2 AIR, PULL and OFF cable.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Keith M.
    Very Frequent User
    • November 1, 1976
    • 205

    #1

    C2 AIR, PULL and OFF cable.

    How many positions are their to the AIR,PULL and OFF cable on 63-67 without AC? Thanks Keith
  • Nick Culkowski

    #2
    Re: C2 AIR, PULL and OFF cable.

    Keith,

    The '67 Owner's Manual will describe operation of controls for the model year... if a '63 I'd check the '63 OM...

    Comment

    • Gerard F.
      Extremely Frequent Poster
      • July 1, 2004
      • 3803

      #3
      Re: C2 AIR, PULL and OFF cable.

      On a 67 w/o AC, there are 3 positions.

      All the way in, no outside air, no heating
      Partially out, outside air to the heater
      Fully out, heater air to the defroster.

      Think other years are similar, but maybe not.

      Jerry Fuccillo
      #42179
      Jerry Fuccillo
      1967 327/300 Convertible since 1968

      Comment

      • Mark H.
        Expired
        • November 1, 2005
        • 112

        #4
        Re: C2 AIR, PULL and OFF cable.

        My 65's is the same as Jerry's 67. I've got A/C

        Mark

        Comment

        • Dale S.
          Expired
          • November 12, 2007
          • 1224

          #5
          Re: C2 AIR, PULL and OFF cable.

          I have a 67 with C-60 and never knew it had a center position. Since 1970 it has been closed or on A/C. Dale

          Comment

          • Keith M.
            Very Frequent User
            • November 1, 1976
            • 205

            #6
            Re: C2 AIR, PULL and OFF cable.

            Just took a 66 to FL for PV and they wanted three positions. In my 66 & 67 owners manual as I read it it appears their are only two positions. We got our socket wrenches out and adjusted so there were three positions and everyone was happy. Keith

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"