1967 vette

[Joe C.]

Besides seeing a tank sticker- is there a few quick items to check to see if a "big block" is really suppossed to be in the car. thanks

[Tom D.]

C2 Check the curve (90 deg.) at front of fuel line *NM*

[John H.]

Re: 1967 vette

Joe -

A few "quickies" (almost all of which can be faked):

Must be a St. Louis body
Rear stabilizer bar
7/8" front stabilizer bar
Caps & bolts on yokes at inner half-shaft U-joints (not U-bolts & nuts)
4 holes on rear side of pass. side inner fender for expansion tank bracket rivets filled with bond.
Hood support on driver's side
6000 redline for 390 & 400hp, 6500 redline for 435hp
60 psi oil pressure gauge for 390 & 400hp, 80 psi for 435hp
T.I. if 435hp