GM Part Number Help...Joe Lucia?! - NCRS Discussion Boards

GM Part Number Help...Joe Lucia?!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Chuck S.
    Expired
    • April 1, 1992
    • 4668
    #1

    GM Part Number Help...Joe Lucia?!

    Anyone know the application for GM PN 14057053?

    It looks like an aluminum intake manifold for a big block Chevy, maybe from GM performance parts...It has some "gingerbread" fin-style markings on the runners atypical of factory manifolds.
    Tags: None
      • Top
    • Clem Z.
      Expired
      • January 1, 2006
      • 9427
      #2
      Re: GM Part Number Help...Joe Lucia?!

      it is a alum SBC intake used from 1980 till FI took over on both 305 and 350 engines.
        • Top

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 43193
          #3
          Re: GM Part Number Help...Joe Lucia?!

          Chuck-----

          GM casting #14057053 is a small block manifold, not a big block. It should be a spread-bore flange (Q-Jet) and have EGR provisions. As clem mentions, it was used on 1980's 305 and 350 cid engines used in passenger cars, trucks, and Camaros. It was never used for any Corvette application. The part number for the manifold was GM #14057054 and it's been discontinued for several years.
          In Appreciation of John Hinckley
            • Top

            Comment

            • Chuck S.
              Expired
              • April 1, 1992
              • 4668
              #4
              Re: GM Part Number Help...Joe Lucia?!

              Thanks guys...any WAGs on value?
                • Top

                Comment

                • Clem Z.
                  Expired
                  • January 1, 2006
                  • 9427
                  #5
                  Re: GM Part Number Help...Joe Lucia?!

                  they are on different web sites for as low a $15 to $50
                    • Top

                    Comment

                    • Chuck S.
                      Expired
                      • April 1, 1992
                      • 4668
                      #6
                      Thanks Clem. *NM*

                        • Top

                        Comment

                        Previous template Next
                        Working...

                        Debug Information

                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"