62 Vette Questions - NCRS Discussion Boards

62 Vette Questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John L.
    Expired
    • February 1, 1982
    • 35

    62 Vette Questions

    1.Should there be a lock washer under the nut on the center bearing of the steering linkage?

    2. I'm looking for a recommendation (Brand/Part Number)for a set of 1 5/8 tube headers that will fit a 62 without requiring any modifications except for the obvious exhaust system mods.

    3. Will 15 X 7 American Torque Thrust wheels with 215 70R fit ok?
  • Duke W.
    Beyond Control Poster
    • January 1, 1993
    • 15610

    #2
    Re: 62 Vette Questions

    Not sure if the Torque Thrusts will fit,but shoot for 225/70s as they match the OEM revs per mile of the 6.70-15s at 760.

    Check archives for a thread titled "Police Pursuit Tires".

    Duke

    Comment

    • John H.
      Beyond Control Poster
      • December 1, 1997
      • 16513

      #3
      Re: 62 Vette Questions

      John -

      The nut below the center bearing should be the castellated type, with a cotter pin securing it - key safety item.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"