Distributor Identification, Model 1110915

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bob A.
    Expired
    • April 1, 2003
    • 168

    #1

    Distributor Identification, Model 1110915

    Your help would be greatly appreciated in identifying a Delco Remy Distributor, Model 1110915, Serial 6 E 23. Year, Engine, Etc.

    Many Thanks and Best Wishes!

    Bob
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 42936

    #2
    Re: Distributor Identification, Model 1110915

    Bob----

    GM #1110915 is applicable to 1958-60 250 hp FI engines as well as 1961 275 hp FI engine. Given the date code of 6 E 23, I would say that this was a SERVICE distributor manufactured on May 23, 1966.
    In Appreciation of John Hinckley

    Comment

    • Bob A.
      Expired
      • April 1, 2003
      • 168

      #3
      Re: Distributor Identification, Model 1110915

      Joe:

      Many thanks for your generous help and valuable information.

      Best Wishes!

      Bob

      Comment

      • John D.
        Extremely Frequent Poster
        • December 1, 1979
        • 5507

        #4
        Re: Distributor Identification, Model 1110915

        Bob,In all my years in the FI stuff I never heard of a 6E23. Joe is right of course about it being a possible service replacement. Typically all the 915 distributors were built in late 57 and stamped as such no matter if they fit 58 to 61. Does you distributor have a hex vacuum advance? John

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 42936

          #5
          Re: Distributor Identification, Model 1110915

          John----

          The GM #1110915 was available in SERVICE until October, 1969. Of course, that does not necessarily tell us when the last one was actually manufactured. However, considering this, it's very possible that they were still being manufactured for SERVICE in 1966.
          In Appreciation of John Hinckley

          Comment

          • Bob A.
            Expired
            • April 1, 2003
            • 168

            #6
            Re: Distributor Identification, Model 1110915

            John:

            Yes, it does have a "hex" vacuum advance.

            Regards,

            Bob

            Comment

            • John D.
              Extremely Frequent Poster
              • December 1, 1979
              • 5507

              #7
              Re: Distributor Identification, Model 1110915

              Joe, I believe you on the service replacement. Just personally haven't seen one of those because that distr wasn't very popular. Until recent years you couldn't give one away. Finding the correct vac advance for that distr is really hard. Thanks, John

              Comment

              Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"