Tweet
Hi:
Need to find parts but don't have the part numbers. Would appreciate the part numbers and any leads on where to source the parts. Attempting to do a proper NCRS restoration:
1. Windshield stainless steel molding (vertical piece)for the right side;
2. Accelerator spring (the double ended spring that attaches to the pedal
itself);
3. The 8"-10" bolt that goes through the starter to the starter brace. It
has a nipple thread on the end.
Don't have access at the moment to either my AIM or the judging manual.
Thanks.
Chuck Faillace
Need to find parts but don't have the part numbers. Would appreciate the part numbers and any leads on where to source the parts. Attempting to do a proper NCRS restoration:
1. Windshield stainless steel molding (vertical piece)for the right side;
2. Accelerator spring (the double ended spring that attaches to the pedal
itself);
3. The 8"-10" bolt that goes through the starter to the starter brace. It
has a nipple thread on the end.
Don't have access at the moment to either my AIM or the judging manual.
Thanks.
Chuck Faillace