C1 Window adjustment

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Paul Robinson

    #1

    C1 Window adjustment

    I cannot get the passenger window all of the way down. My maintenance books describe how to adjust the "UP" distance, but not the "DOWN" distance. Any help?
  • Bob Malone #35242

    #2
    Re: C1 Window adjustment

    How far down does it go?

    Comment

    • Bob Malone #35242

      #3
      Re: C1 Window adjustment

      How far down does it go?

      Comment

      • Paul Robinson

        #4
        Re: C1 Window adjustment

        It goes almost all of the way ... stops about 5 inches short at the door post.

        Comment

        • Paul Robinson

          #5
          Re: C1 Window adjustment

          It goes almost all of the way ... stops about 5 inches short at the door post.

          Comment

          • John M.
            Expired
            • January 1, 1999
            • 8

            #6
            Re: C1 Window adjustment

            Paul, There is no adjustable stop at the bottom like there is at the top. at the bottom the window justs runs into a fixed rubber bumper at the bottom of the door. The most likely culprits are worn out rollers and a misadjusted rear run or center curved track. The rollers are available from a number of sources and the track adjustment is a matter of trial and error. I would remove the regulator first and assure that all rollers are in good shape and that the gear is in good shape. John

            Comment

            • John M.
              Expired
              • January 1, 1999
              • 8

              #7
              Re: C1 Window adjustment

              Paul, There is no adjustable stop at the bottom like there is at the top. at the bottom the window justs runs into a fixed rubber bumper at the bottom of the door. The most likely culprits are worn out rollers and a misadjusted rear run or center curved track. The rollers are available from a number of sources and the track adjustment is a matter of trial and error. I would remove the regulator first and assure that all rollers are in good shape and that the gear is in good shape. John

              Comment

              Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"