Rusted through Mounting bracket - NCRS Discussion Boards

Rusted through Mounting bracket

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Clayton Catchings

    Rusted through Mounting bracket

    I am rebuilding a 73 roadster. The original frame was too rusty (car was from Philly). I bought a used frame and replaced all the componets. When I lifted the body off the old frame, the #3 mounting hole on the driver's side is rusted away. Is there a quick fix? This will be a driver.
    Clay
  • Bill Clupper

    #2
    Re: Rusted through Mounting bracket

    If you are talking about the brachet attached to the body, there are a number of sources that can supply a replacement and you then simply rivit it in. Try Bair's in Linesville PA, 814-683-4223 for parts and rivits

    Comment

    • Bill Clupper

      #3
      Re: Rusted through Mounting bracket

      If you are talking about the brachet attached to the body, there are a number of sources that can supply a replacement and you then simply rivit it in. Try Bair's in Linesville PA, 814-683-4223 for parts and rivits

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"