Clutch Head Screws

[M W.]

I am in a quandary trying to locate a cluch head driver. Several of my 1961 parts require a clutch head screw. Can someone please tell me where to find a set of these. Please don't tell me Sears. They have no idea what I am asking for. Thanks in advance.
Craig
NCRS# 36551

[Denny Jacobs]

Re: Clutch Head Screws

I know that ChannelLock makes a set of four. I picked them up at the last car show I went to. You might check with ChannelLock directly to see who they sell them through.

[Denny Jacobs]

Re: Clutch Head Screws

I know that ChannelLock makes a set of four. I picked them up at the last car show I went to. You might check with ChannelLock directly to see who they sell them through.

[Garry Barnes]

Re: Clutch Head Screws

Corvette Central has them in sets of three. I use them all of the time.

[Garry Barnes]

Re: Clutch Head Screws

Corvette Central has them in sets of three. I use them all of the time.

[John M.]

Re: Clutch Head Screws

My local NAPA dealer still keeps them in stock. John

[John M.]

Re: Clutch Head Screws

My local NAPA dealer still keeps them in stock. John

[Bill W.]

Re: Clutch Head Screws

Snap On still makes them .Bill

[Bill W.]

Re: Clutch Head Screws

Snap On still makes them .Bill

[Al C.]

Re: Clutch Head Screws

look at ChevyDuty.com, set of 4.
...Al '58 #378 245hp NCRS SACC

[Al C.]

Re: Clutch Head Screws

look at ChevyDuty.com, set of 4.
...Al '58 #378 245hp NCRS SACC

[M W.]

Re: Clutch Head Screws

Thanks to all. My last question is in regards to the different sizes. My seat bottom track uses one at least 1/2". The ones that are advertised for sale only go up to 1/4". Are there larger ones available? Thanks again.

[M W.]

Re: Clutch Head Screws

Thanks to all. My last question is in regards to the different sizes. My seat bottom track uses one at least 1/2". The ones that are advertised for sale only go up to 1/4". Are there larger ones available? Thanks again.

[Gary Bishop]

Re: Clutch Head /Make your own

I made my own using bolts. I ground the threaded sides of an appropriate size bolt to fit the screw and used a socket to hold the head. I have a set for 1/4 and 1/2 inch drives. I keep the getting lost in a clear box.

[Gary Bishop]

Re: Clutch Head /Make your own

I made my own using bolts. I ground the threaded sides of an appropriate size bolt to fit the screw and used a socket to hold the head. I have a set for 1/4 and 1/2 inch drives. I keep the getting lost in a clear box.